Radial DiNet Dan-RX 2-Channel Dante Network Receiver

Radial DiNet Dan-RX 2-Channel Dante Network Receiver

The DAN-RX provides a simple way to take a stereo feed from a Dante network and convert it to analog audio for monitoring in any location. Balanced XLR outputs allow you to connect to professional audio equipment such as a mixing console, amplifier, or a pair of powered speakers. In addition, a local 3.5mm headphone output is equipped with its own level control to test audio before connection to the PA system or to monitor locally with headphones, making it useful in events that use personal monitor systems. The DAN-RX can be powered from an included external supply or any Power over Ethernet (PoE) network switch, and both of these options can be used simultaneously to provide redundancy for critical applications.

Key Features

• Stereo analog output device for Dante networks
• Balanced XLR outputs for connection at mic or line level
• Headphone amplifier for personal monitoring
• 24bit/96kHz digital to analog conversion

Technical Specifications

Audio circuit type
High current balanced active output device
Number of channels
2
Frequency response
20Hz - 20kHz
Dynamic range
>100dB
Gain
8dBu max @ -6dBfs
Total harmonic distortion
0.007% @ -6dBfs
Output Impedance
150
Noise
44.1kHz, 48kHz, 88.2kHz, and 96kHz (24 bit)
Construction
14-gauge steel
Size (L x W x D)
5” x 3.31” x 1.88” (12.7cm x 8.4cm x 4.8cm)
Weight
1.45lb (0.66kg)
Shipping size (L x W x D)
11.75” x 4.75” x 3” (29.8cm x 12.1cm x 7.6cm)
Shipping weight
2.1lb (0.95kg)
Power
15VDC 400mA (included) or PoE
Conditions
For use in dry locations only between 5°C and 40°C